January 2015 Archive

What we can learn from chicken

Posted by grando On 14. January 2015 7. August 2017 Filed under general

Chicken cackle like crazy when they do so. What is the consequence? “The entire world eats chicken eggs.” Keep reading →

grando goes east

Posted by grando On 6. January 2015 7. August 2017 Filed under general, tradefairs

We are going to Moscow in February. This is not the best time of year to travel to the Russian capital. It is when snow and sleet, icy wind and an overcast sky characterise the city scenery. But it is not a recreational trip anyway. Keep reading →

Construction:	Roller system mounted on the edge of the pool
Installation:	New or subsequent fitting
Maximum size:	6 m x 12 m; for larger pools, a Compact type unit should be used.
Drive units:	Side sections semi-circular or rectangular
Cover slats:	Light slats 60 mm wide and 10 mm thick
Guidelines:	Installation approved for private and public swimming pools

Construction:	Roller system mounted on the edge of the pool
Installation:	New or subsequent fitting
Maximum size:	50 m x 25 m (larger sizes depending on pool shape) Where the pool width is larger than 12,50 m, we recommend a cover divided in two.
Drive unit:	Drive unit mounted on the side
Cover slats:	Standard slats 60 mm wide and 14 mm thick
Guidelines:	Installation approved for private and public pools

Construction:	The entire roller system is mounted on rollers and can, when required, be moved manually or electrically on permanently mounted guide rails
Installation:	New or subsequent fitting
Maximum size:	50 m x 25 m (larger sizes depending on pool shape). Where the pool width is larger than 12.50 m, we recommend a cover divided into two
Drive unit:	Drive unit mounted on the side
Cover slats:	Standard slats 60 mm wide and 14 mm thick
Guidelines:	Installation approved for private and public swimming pools

Construction:	Roller system mounted above the bottom of the pool
Installation:	New and subsequent fitting
Maximum size:	25 m x 50 m (larger sizes depending on pool shape) From a pool width of 12.50 m, we recommend a cover divided into two
Drive unit in separate motor pit:	Drive unit mounted on the shaft or chain drive
Drive unit without motor pit:	Tubular motor (not always possible, dependent on pool width and depth)
Cover slats:	Standard slats 60 mm wide and 14 mm thick
Guidelines:	Installation approved only for private pools