Skip to content
de_DEen_US
grando GmbH (EN) grando GmbH (EN)
  • Products
      • Above-Ground Pool Covers
          • Light
            • /wp-content/uploads/sites/2/04_07_grando_Light_above-ground_cover_automatic_0182.mp4

              Above ground Poolcover-System
              TYPE LIGHT

              Construction: Roller system mounted on the edge of the pool
              Installation: New or subsequent fitting
              Maximum size: 6 m x 12 m; for larger pools, a Compact type unit should be used.
              Drive units: Side sections semi-circular or rectangular
              Cover slats: Light slats 60 mm wide and 10 mm thick
              Guidelines: Installation approved for private and public swimming pools
          • Compact
            • /wp-content/uploads/sites/2/04_08_grando_Compact_above-ground_cover_automatic_0183.mp4

              Above ground Poolcover-System
              TYPE COMPACT

              Construction: Roller system mounted on the edge of the pool
              Installation: New or subsequent fitting
              Maximum size: 50 m x 25 m (larger sizes depending on pool shape)
              Where the pool width is larger than 12,50 m, we recommend a cover divided in two.
              Drive unit:
              		 Drive unit mounted on the side
              Cover slats: Standard slats 60 mm wide and 14 mm thick
              Guidelines: Installation approved for private and public pools
          • Mobile
            • /wp-content/uploads/sites/2/04_09_grando_mobile_wheeled_above-ground_cover_automatic_0184.mp4

              Above ground Poolcover-System
              TYPE MOBILE

              Construction: The entire roller system is mounted on rollers and can, when required, be moved manually or electrically on permanently mounted guide rails
              Installation: New or subsequent fitting
              Maximum size: 50 m x 25 m (larger sizes depending on pool shape). Where the pool width is larger than 12.50 m, we recommend a cover divided into two
              Drive unit:

              		 Drive unit mounted on the side
              Cover slats: Standard slats 60 mm wide and 14 mm thick
              Guidelines: Installation approved for private and public swimming pools
      • Below Ground Poolcovers
          • IBS-1
            • /wp-content/uploads/sites/2/04_10_grando_IBS-1_below-ground_poolcover_automatic_0185.mp4

              Below ground poolcover-system
              TYPE IBS-1

              Construction: Roller system mounted above the bottom of the pool
              Installation: New and subsequent fitting
              Maximum size: 25 m x 50 m (larger sizes depending on pool shape) From a pool width of 12.50 m, we recommend a cover divided into two
              Drive unit in separate motor pit: Drive unit mounted on the shaft or chain drive
              Drive unit without motor pit: Tubular motor (not always possible, dependent on pool width and depth)
              Cover slats: Standard slats 60 mm wide and 14 mm thick
              Guidelines: Installation approved only for private pools
          • IBS-2
            • /wp-content/uploads/sites/2/04_11_grando_IBS-2_below-ground_poolcover_Graeting_electric_0186.mp4

              Below ground poolcover-system
              TYPE IBS-2

              Construction: Roller system in the pit below the bottom of the pool
              Installation: New construction
              Maximum size: 25 m x 50 m (larger sizes depending on the pool shape). From a pool width of 12.50 m, we recommend a cover divided into two.
              Drive unit in separate motor pit: Drive unit mounted on the shaft or chain drive
              Drive unit without motor pit: Tubular motor (not always possible, dependent on pool width and depth)
              Cover slats: Standard slats 60 mm wide and 14 mm thick
              Guidelines: Installation approved only for private pools
          • IBS-3
            • /wp-content/uploads/sites/2/04_12_grando_IBS-3_below-ground_poolcover_automatic-shaft-clapper_0187.mp4

              Below ground poolcover-system
              TYPE IBS-3

              Construction: The roller system is mounted in the pit below the bottom of the pool with an automatic shutter
              Installation: New construction
              Maximum size: 25 m x 50 m (larger sizes depending on the pool shape). From a pool width of 12.50 m, we recommend a cover divided into two
              Drive unit in separate motor pit: Drive unit mounted on the shaft or chain drive
              Drive unit without motor pit: Not possible
              Cover slats: Standard slats 60 mm wide and 14 mm thick
              Guidelines: Installation approved for private and public swimming pools
          • IBS-4
            • /wp-content/uploads/sites/2/04_13_grando_IBS-4_below-ground_pool-cover_electric_0188.mp4

              Below ground poolcover-system
              TYPE IBS-4

              Construction: Mounted directly below the surface of the water
              Installation: New or retrofitting
              Maximum size: 25 m x 50 m (larger sizes depending on the pool shape).
              Drive unit in separate motor pit: Drive unit mounted on the shaft or chain drive
              Drive unit without motor pit: Tubular motor (not always possible, dependent on pool width)
              Cover-slats: Standard slats 60 mm wide and 14 mm thick
              Guidelines: Installation approved only for private pools
          • IBS-5
            • /wp-content/uploads/sites/2/04_14_grando_IBS-5_below-ground_pool-cover_electric_0189.mp4

              Below ground poolcover-system
              TYPE IBS-5

              Construction: Roller system let into the wall of the pool with a front panel. The water level is below the top of the pit.
              Installation: New construction
              Maximum size: 25 m x 50 m (larger sizes depending on the pool shape). From a pool width of 12.50 m, we recommend a cover divided into two.
              Drive unit in separate motor pit: Drive unit mounted on the shaft or chain drive
              Drive unit without motor pit: Tubular motor (not always possible, dependent on pool width and depth)
              Cover slats: Standard slats 60 mm wide and 14 mm thick
              Guidelines: Installation approved only for private pool
          • IBS-6
            • /wp-content/uploads/sites/2/04_15_grando_IBS-6_below-ground_pool_cover_rigid_electric_panel_0190.mp4

              Below ground poolcover-system
              TYPE IBS-6

              Construction: Roller system let into the wall of the pool with a front panel. Because the water level is above the top of the pit, guide rollers are built into the cover pit
              Installation: New construction
              Maximum size: 25 m x 50 m (larger sizes depending on the pool shape). From a pool width of 12.50 m, we recommend a cover divided into two
              Drive unit in separate motor pit: Drive unit mounted on the shaft or chain drive
              Drive unit without motor pit: Tubular motor (not always possible, dependent on pool width and depth)
              Cover slats: Standard slats 60 mm wide and 14 mm thick
              Guidelines: Installation approved only for private pools
          • IBS-8
            • /wp-content/uploads/sites/2/04_16_grando_IBS-8_below-ground_pool-cover_automatic-shaft-clapper_0191.mp4

              Below ground poolcover-system
              TYPE IBS-8

              Construction: Roller system mounted below the bottom of the pool with one shaft and for two covers. With automatic shutter
              Installation: New construction
              Maximum size: 25 m x 50 m (larger sizes depending on the pool shape). From a pool width of 12.50 m, we recommend a cover divided into two
              Drive unit in separate motor pit: Drive unit mounted on the shaft or chain drive
              Drive unit without motor pit:  Not possible
              Cover slats: Standard slats 60 mm wide and 14 mm thick
              Guidelines: Installation approved for private and public swimming pools
          • IBS-9
            • /wp-content/uploads/sites/2/04_17_grando_IBS-9_below-ground_pool_cover_well_electric_0192.mp4

              Below ground poolcover-system
              TYPE IBS-9

              Construction: The roller system is accommodated in a separate pit behind the pool. The pit is filled with water and connected to the pool through a gap
              Installation: New construction
              Maximum size: 25 m x 50 m (larger sizes depending on the pool shape). From a pool width of 12.50 m, we recommend a cover divided into two.
              Drive unit in separate motor pit: Drive unit mounted on the shaft or chain drive
              Drive unit without motor pit: Tubular motor (not always possible, dependent on pool width and depth)
              Cover slats: Standard slats 60 mm wide and 14 mm thick
              Guidelines: Installation approved only for private pools
      • Poolcover Slats
          • Light Profile (6010)
          • Premium Profile (6014)
          • Cap-Tec Profiles
      • Drive Units
          • Drive Units for Above Ground Poolcover-Systems
          • Drive Units for below ground Poolcover-Systems
  • Key Benefits
  • Blog
  • Awards
  • The Company
  • Contact Us
  • Login

awards Category

Good luck, grando partner Köppen!

Good luck, grando partner Köppen!

Posted by grando On 9. July 2015 7. August 2017 Filed under awards, partner
We keep our fingers crossed for grando-partner Rainer Köppen Schwimmbadtechnik. Keep reading →
grando On 9. July 2015 7. August 2017 Filed under awards, partner
Auszeichnung
Congratulations, Covertech!

Congratulations, Covertech!

We are proud of our specialised dealer Covertech, who has once again received the Gold Award from the American Swimming Association APSP.
grando On 3. December 2014 7. August 2017 Filed under awards, partner

Recent Posts

  • EUSA AWARDS 2020
  • Why the grando team wore bow ties
  • Kohlscheid, Coventry and great expertise
  • grando digital: for near and far
  • Stars, starlets and award-winning grando covers

Categories

  • awards (2)
  • general (33)
  • partner (12)
  • tradefairs (13)

Archives

  • February 2021 (1)
  • November 2017 (1)
  • October 2017 (2)
  • September 2017 (1)
  • August 2017 (1)
  • June 2017 (1)
  • June 2016 (1)
  • April 2016 (1)
  • March 2016 (1)
  • February 2016 (1)
  • December 2015 (3)
  • November 2015 (2)
  • October 2015 (7)
  • September 2015 (3)
  • August 2015 (2)
  • July 2015 (6)
  • June 2015 (3)
  • May 2015 (2)
  • April 2015 (1)
  • March 2015 (2)
  • February 2015 (1)
  • January 2015 (2)
  • December 2014 (2)
  • November 2014 (1)
  • October 2014 (2)
  • September 2014 (1)

grando GmbH
De-Gasperi-Straße 6
D-51469 Bergisch Gladbach

Contact
Phone: +49 (0)2202 / 1049-0
Fax: +49 (0)2202 / 1049-10
Email: info@grando.de

Opening-hours:
Mo-Th: 7:30 - 16:30 Uhr
Fr: 7:30 - 14:00 Uhr

Associations:

Management:
Bert Granderath, Frank Granderath
AG Köln HRB Nr. 46755
Steuer-Nr.: 204 / 5754 / 0324

Imprint
GTC
Disclaimer
Privacy Statement

© 2024 grando GmbH (EN)