August 2015 Archive

Water fun on International Youth Day

Posted by grando On 12. August 2015 7. August 2017 Filed under general

Everyone’s talking about the increasingly ageing population. But first and foremost, today is International Youth Day. A day for the young generation! Is there something that excites the “youth of yesterday” and the “youth of today” in equal measure? A swimming pool spontaneously occurs to me. Keep reading →

Save the date: aqua-therm 2016 in Moscow

Posted by grando On 3. August 2015 7. August 2017 Filed under tradefairs

There are many masterminds and ingenious scientists. But the best inventions are created by nature. If – befitting of today’s Day of the Watermelon – I take a look at the red fruit then the thick skin is directly apparent. Keep reading →

Construction:	Roller system mounted on the edge of the pool
Installation:	New or subsequent fitting
Maximum size:	6 m x 12 m; for larger pools, a Compact type unit should be used.
Drive units:	Side sections semi-circular or rectangular
Cover slats:	Light slats 60 mm wide and 10 mm thick
Guidelines:	Installation approved for private and public swimming pools

Construction:	Roller system mounted on the edge of the pool
Installation:	New or subsequent fitting
Maximum size:	50 m x 25 m (larger sizes depending on pool shape) Where the pool width is larger than 12,50 m, we recommend a cover divided in two.
Drive unit:	Drive unit mounted on the side
Cover slats:	Standard slats 60 mm wide and 14 mm thick
Guidelines:	Installation approved for private and public pools

Construction:	The entire roller system is mounted on rollers and can, when required, be moved manually or electrically on permanently mounted guide rails
Installation:	New or subsequent fitting
Maximum size:	50 m x 25 m (larger sizes depending on pool shape). Where the pool width is larger than 12.50 m, we recommend a cover divided into two
Drive unit:	Drive unit mounted on the side
Cover slats:	Standard slats 60 mm wide and 14 mm thick
Guidelines:	Installation approved for private and public swimming pools

Construction:	Roller system mounted above the bottom of the pool
Installation:	New and subsequent fitting
Maximum size:	25 m x 50 m (larger sizes depending on pool shape) From a pool width of 12.50 m, we recommend a cover divided into two
Drive unit in separate motor pit:	Drive unit mounted on the shaft or chain drive
Drive unit without motor pit:	Tubular motor (not always possible, dependent on pool width and depth)
Cover slats:	Standard slats 60 mm wide and 14 mm thick
Guidelines:	Installation approved only for private pools