Products

Above-Ground Pool Covers

Above ground Poolcover-System
TYPE LIGHT

Construction:	Roller system mounted on the edge of the pool
Installation:	New or subsequent fitting
Maximum size:	6 m x 12 m; for larger pools, a Compact type unit should be used.
Drive units:	Side sections semi-circular or rectangular
Cover slats:	Light slats 60 mm wide and 10 mm thick
Guidelines:	Installation approved for private and public swimming pools

Above ground Poolcover-System
TYPE COMPACT

Construction:	Roller system mounted on the edge of the pool
Installation:	New or subsequent fitting
Maximum size:	50 m x 25 m (larger sizes depending on pool shape) Where the pool width is larger than 12,50 m, we recommend a cover divided in two.
Drive unit:	Drive unit mounted on the side
Cover slats:	Standard slats 60 mm wide and 14 mm thick
Guidelines:	Installation approved for private and public pools

Above ground Poolcover-System
TYPE MOBILE

Construction:	The entire roller system is mounted on rollers and can, when required, be moved manually or electrically on permanently mounted guide rails
Installation:	New or subsequent fitting
Maximum size:	50 m x 25 m (larger sizes depending on pool shape). Where the pool width is larger than 12.50 m, we recommend a cover divided into two
Drive unit:	Drive unit mounted on the side
Cover slats:	Standard slats 60 mm wide and 14 mm thick
Guidelines:	Installation approved for private and public swimming pools

Below Ground Poolcovers

Below ground poolcover-system
TYPE IBS-1

Construction:	Roller system mounted above the bottom of the pool
Installation:	New and subsequent fitting
Maximum size:	25 m x 50 m (larger sizes depending on pool shape) From a pool width of 12.50 m, we recommend a cover divided into two
Drive unit in separate motor pit:	Drive unit mounted on the shaft or chain drive
Drive unit without motor pit:	Tubular motor (not always possible, dependent on pool width and depth)
Cover slats:	Standard slats 60 mm wide and 14 mm thick
Guidelines:	Installation approved only for private pools

Below ground poolcover-system
TYPE IBS-2

Construction:	Roller system in the pit below the bottom of the pool
Installation:	New construction
Maximum size:	25 m x 50 m (larger sizes depending on the pool shape). From a pool width of 12.50 m, we recommend a cover divided into two.
Drive unit in separate motor pit:	Drive unit mounted on the shaft or chain drive
Drive unit without motor pit:	Tubular motor (not always possible, dependent on pool width and depth)
Cover slats:	Standard slats 60 mm wide and 14 mm thick
Guidelines:	Installation approved only for private pools

Below ground poolcover-system
TYPE IBS-3

Construction:	The roller system is mounted in the pit below the bottom of the pool with an automatic shutter
Installation:	New construction
Maximum size:	25 m x 50 m (larger sizes depending on the pool shape). From a pool width of 12.50 m, we recommend a cover divided into two
Drive unit in separate motor pit:	Drive unit mounted on the shaft or chain drive
Drive unit without motor pit:	Not possible
Cover slats:	Standard slats 60 mm wide and 14 mm thick
Guidelines:	Installation approved for private and public swimming pools

Below ground poolcover-system
TYPE IBS-4

Construction:	Mounted directly below the surface of the water
Installation:	New or retrofitting
Maximum size:	25 m x 50 m (larger sizes depending on the pool shape).
Drive unit in separate motor pit:	Drive unit mounted on the shaft or chain drive
Drive unit without motor pit:	Tubular motor (not always possible, dependent on pool width)
Cover-slats:	Standard slats 60 mm wide and 14 mm thick
Guidelines:	Installation approved only for private pools

Below ground poolcover-system
TYPE IBS-5

Construction:	Roller system let into the wall of the pool with a front panel. The water level is below the top of the pit.
Installation:	New construction
Maximum size:	25 m x 50 m (larger sizes depending on the pool shape). From a pool width of 12.50 m, we recommend a cover divided into two.
Drive unit in separate motor pit:	Drive unit mounted on the shaft or chain drive
Drive unit without motor pit:	Tubular motor (not always possible, dependent on pool width and depth)
Cover slats:	Standard slats 60 mm wide and 14 mm thick
Guidelines:	Installation approved only for private pool

Below ground poolcover-system
TYPE IBS-6

Construction:	Roller system let into the wall of the pool with a front panel. Because the water level is above the top of the pit, guide rollers are built into the cover pit
Installation:	New construction
Maximum size:	25 m x 50 m (larger sizes depending on the pool shape). From a pool width of 12.50 m, we recommend a cover divided into two
Drive unit in separate motor pit:	Drive unit mounted on the shaft or chain drive
Drive unit without motor pit:	Tubular motor (not always possible, dependent on pool width and depth)
Cover slats:	Standard slats 60 mm wide and 14 mm thick
Guidelines:	Installation approved only for private pools

Below ground poolcover-system
TYPE IBS-8

Construction:	Roller system mounted below the bottom of the pool with one shaft and for two covers. With automatic shutter
Installation:	New construction
Maximum size:	25 m x 50 m (larger sizes depending on the pool shape). From a pool width of 12.50 m, we recommend a cover divided into two
Drive unit in separate motor pit:	Drive unit mounted on the shaft or chain drive
Drive unit without motor pit:	Not possible
Cover slats:	Standard slats 60 mm wide and 14 mm thick
Guidelines:	Installation approved for private and public swimming pools

Below ground poolcover-system
TYPE IBS-9

Construction:	The roller system is accommodated in a separate pit behind the pool. The pit is filled with water and connected to the pool through a gap
Installation:	New construction
Maximum size:	25 m x 50 m (larger sizes depending on the pool shape). From a pool width of 12.50 m, we recommend a cover divided into two.
Drive unit in separate motor pit:	Drive unit mounted on the shaft or chain drive
Drive unit without motor pit:	Tubular motor (not always possible, dependent on pool width and depth)
Cover slats:	Standard slats 60 mm wide and 14 mm thick
Guidelines:	Installation approved only for private pools